Browsed by
Tag: mountainbiking

Specialized Stumpjumper ST – Interest Free Deals from £79 a Month

Specialized Stumpjumper ST – Interest Free Deals from £79 a Month

Grab this fantastic Specialized Stumpjumper from just £79 a month with 0% Interest!!!

Frame: M5 alloy chassis and rear end, asymmetrical design, 27.5 Trail Geometry, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, 130mm of travel
Fork: RockShox Recon RL, Motion Control damper with low-speed compression to lockout, 46mm offset, rebound adjust, 15x110mm Boost™ Maxle® Lite thru-axle, 130mm of travel
Rear Shock: X-Fusion 02 Pro RL, Rx Trail Tune, rebound adjust, lockout 190x45mm
Stem: Specialized, 3D-forged alloy, 4-bolt, 7-degree rise
Bars: Specialized Trail, 6061 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm clamp
Front Brake: Tektro Gemini Comp, hydraulic disc, resin pad, 200mm
Rear Brake: Tektro Gemini Comp, hydraulic disc, resin pad, 180mm
Rear Mech: SRAM SX Eagle
Shifters: SRAM SX Eagle, trigger, 12-speed
Speed: 12
Rims: Double-wall alloy, 27mm internal width
Front Hub: Specialized, sealed cartridge bearings, 15x110mm thru-axle, 32h
Rear Hub: Specialized, sealed cartridge bearings, 12x148mm thru-axle, 32h
Front Tyre: Purgatory, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.3″
Rear Tyre: Purgatory, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.3″
Seat Post: TransX dropper, 34.9mm, XS: 100mm, S: 125mm, ML/XL: 150mm Travel
Saddle: Body Geometry Myth 155 S, Body Geometry Henge 143 M/L/XL, steel rails
Chainset: SRAM SX Eagle, Powerspline, 170mm, 32T
Bottom Bracket: SRAM Powerspline
Chain: SRAM SX Eagle, 12-speed
Cassette: SRAM PG-1210 Eagle, 11-50t
Pedals: Specialized Dirt

No Deposit and pay £79.13 a month for 24 Months 0% Interest Free – at Tredz Cycles Total Price £1899

No Deposit and pay £79 a month for 24 Months 0% Interest Free – at Rutland Cycles Total Price £1898

£150 Deposit and pay £142.50 a month for 12 Months 0% Interest Free – at Evans Cycles Total Price £1899

Short beginners guide to Mountain Bikes

Short beginners guide to Mountain Bikes

Mountain Bikes Are Perfect Hill Heroes by Robert Sheehan

Mountain bikes are specially meant for rough and rugged terrains. These extra traction and shock absorbing mountain bicycles are provided with fat knobby tires.

However, a full front and rear suspension is becoming quite a common factor nowadays with bikes meant for mountain rides. Some bikes of this particular variety are fitted with bar ends on the handlebars, but with recent trends the use of handlebars and extensions are becoming less and less popular.

Mountain bicycles have both 26 and 29 inches wheels. The larger wheels of this bike type have better rolling capacities over rocks and boulders. Moreover, wheels, which are larger in diameter, also bring about an enhancement in rotational weight giving way to stable acceleration.

Mountain Bicycles Kings On Rugged Roads

Based on suspension, mountain bicycles are broadly graded into four different kinds:

Bikes with dual or full suspension, These bikes have front suspension fork and rear suspension with a rear shock and linkage that is ready to make the rear wheels move on pivots

Hardtail bikes, These bikes have frames with no rear suspension and they are often supplied with front suspension forks

Soft Tail Bikes, These bikes have frames with small amount of rear suspension. The bikes are activated by flex of the frame rather than the pivots

Fully rigid bikes, These bikes have a sub-type of hardtail along with rigid fork system

The Different Types Of Mountain Bicycles

The Cross-Country Mountain Bike

This bike variety has small amount of suspension on the front or on the rear. These bicycles are comparatively light because they are constructed with lightweight materials both in frame construction and in components.

Some XC bike varieties of this particular type are without any suspension. They make use of rigid front fork that helps in saving weight. Here, the skill of the rider to pass through rough terrains is more important.

Freeride Mountain Bike

These are very similar to enduro bikes and emphasize more on weight and enhanced suspension. These bikes have ample suspension and they are mostly constructed with heavier materials. Freeride bikes are absolutely versatile and they are fantastic for uphill travel. The frame angles of such bikes are usually steeper in comparison to downhill bikes. Most freeride bikes are 30 to 45 pounds in weight.

Trials Mountain Bike

These are trial specific bikes. Most of these bikes are without any suspension. The contemporary trial bikes come without seats as most of the time the rider is out of the saddle. This bike is particularly lighter than other mountain bicycles and it weighs between 15 to 25 pounds. The lightweight makes it easier for the biker to maneuver the bike.

Single-Speed Mountain Bike

This is a kind of mountain bike with one set gear ratio. The ratio of the gear depends on the kind of terrain the bike crosses, the skill and strength of the bike rider and the size of the bike too. A single-speed bike is completely rigid having tough steel frames. If you want to ride a single-speed bicycle on mild to moderate cross-country terrains you have to be strong and active.

North Shore Mountain Bike

North shore mountain bike is genuinely constructed for rough and rugged land surfaces. A rider of this particular bike type has to exhibit lots of skill and balance while riding the bike. This bike is a wonderful combination of freeride and downhill bikes.

The other mountain bike varieties include Enduro Mountain Bike, Downhill Mountain Bike and Dirt Jumping Bike.

Most modern bikes meant for mountains have lighter and stronger frames with innovative design and form. The geometry of these bikes encourages vigorous riding over several obstacles like logs, rocks, wooden bridges and manually fabricated ramps. In the front, the bikes have three gears and it has 7, 8, 9, or 10 gears at the rear wheel position.

Some notable companies who have introduced the latest models of mountain bicycles include Fox, Manitou and Rock Shox along with other significant bike manufacturers. It is quite likely for you to make mistakes while riding a mountain bike. The mishaps generally take place due to equipment failure or misjudgment on the part of the rider.

Thus, several companies have come forward with protective gears referred to as armors to provide full protection from injuries. Some essential upper body protectors for riders include spine protector, full-face helmets and backpack hydration system.

It is quite an established fact that mountain bicycles are aptly designed following the present trend and demand. They are in fact the dream of every spirited and efficient mountain biker.

Robert Sheehan is a freelance writer and co-owner of Visit Robert And
read more about bicycles at

Article Source: